Home  |  What's New  |  Features  |  Gallery  |  Reviews  |  Reference  |  Forum  |  Search

Messerschmitt Me 262 A-1A/U4 "Pulkzerstorer"

Revell, 1/32 scale

S u m m a r y :

Description and Item No.:

Revell Kit No. 3749 - Messerschmitt Me 262 A-1A/U4 Pulkzerstorer

Contents and Media:

202 parts in grey plastic; eight parts in clear plastic; decals for five schemes;

Price:

£44.99.30 UK Price (£37.49 Export Price) plus shipping available online from Hannants

and retail outlets online and worldwide.

Scale:

1/32

Review Type:

First Look

Advantages:

Finely recessed panel lines and fasteners; includes full engines, undercarriage and gun bays; impressive attention to detail; stunning box art; selection of useful options; thoughtful design features; perfectly printed glossy Cartograf (probably) decals; accurate.

Disadvantages:

None noted.

Recommendation:

Revell’s 1:32 scale Me 262 A-1a/U4 is an interesting and welcome addition to the large scale Luftwaffe jet fighter market.

The relatively modest parts count disguises a pleasingly comprehensive package, with nice cockpit and engine detail, separate control surfaces and the distinctive 50 mm cannon installation.

The option to build a conventional four-gun Me 262 A-1a adds further flexibility and value.

In summary, this is an impressive and thoughtfully detailed kit that should appeal to Me 262 enthusiasts and large-scale Luftwaffe modellers alike.

Highly Recommended.

Reviewed by Brett Green

Introduction

 

The increasing scale of Allied bombing raids over Germany during 1944 prompted the Luftwaffe to seek more effective ways of intercepting heavily defended bomber formations. Although the Messerschmitt Me 262 offered a considerable speed advantage over conventional fighters, its four 30 mm cannon were not always sufficient to destroy large four-engined bombers quickly. The proposed solution was a 50 mm cannon capable of bringing down a bomber with a single well-placed hit. This heavily armed interceptor became known as the Pulkzerstörer (formation destroyer).

The initial experimental installation used a 50 mm BK 5 cannon, but two dedicated Me 262 A-1a/U4 prototypes, Werknummer 111899 and 170083, were developed around the more advanced Rheinmetall-Mauser MK 214A. The weapon weighed approximately 490 kg, carried 22 rounds and required substantial modifications to the aircraft's nose and forward landing gear.

 

 

The first prototype, W.Nr. 111899, made its maiden flight on 19 March 1945 with Messerschmitt test pilot Karl Baur. Subsequent trials included airborne firing tests, although cannon reliability remained problematic. On 5 April, the aircraft was handed to Major Wilhelm Herget for operational evaluation. Two sorties against American bomber formations on 16 April proved unsuccessful when the cannon malfunctioned on both occasions.

The second prototype, W.Nr. 170083, was captured by American forces at Lechfeld in May 1945. Initially named Wilma Jeanne, it was subsequently renamed Happy Hunter II and selected for shipment to the United States. However, during its ferry flight towards Cherbourg, an engine failure resulted in the aircraft crashing near the Channel Islands after its pilot successfully parachuted to safety.

Neither prototype achieved a confirmed combat victory, and the programme ended with Germany's surrender. Nevertheless, the unusual U4 remains one of the most distinctive Me 262 developments, illustrating the increasingly unconventional measures considered by the Luftwaffe during the final months of the war.

 

 

FirstLook

 

In the last decade Revell has slipped several new releases quietly onto hobby shop shelves with little fanfare. This one is a good example, almost escaping my attention entirely.

I was browsing to buy Revell’s single-seater 1/32 scale Me 262 A-1a when the Internet’s model aeroplane algorithm must have kicked in and I found myself looking at a hitherto unknown (to me) Revell 1/32 scale Messerschmitt Me 262 A-1a/U4 Pulkzerstorer, released recently.

Revell’s new 1:32 scale Messerschmitt Me 262 A-1a/U4, Kit No. 03749 is all-plastic with no multi-media elements.

 

The box is flimsy with a light cardboard folding lid, but the artwork is stunning.

Parts count is quite modest - 202 parts in pale grey plastic and eight parts in clear. This does not imply a lack of detail. Quite to the contrary actually.

The very pale grey plastic is not the reviewer's friend, doing little to showcase the kit’s lovely fine detail. A coat of paint will make all the difference.

 

There is one brand-new sprue in the box.

 

This is Sprue N, which delivers the 50 mm gun barrel and perforated muzzle brake, gun bay detail including a removable upper nose hatch, new rotating nose undercarriage leg with new wheel, retraction strut and front undercarriage doors as well as other items unique to this variant.

 

The nose section of the fuselage needs to be cut off before the big gun conversion is applied.

Although it is not mentioned in the instructions, the model may also be built as a standard Me 262 A-1a fighter. In addition to providing all the parts required for the four-gun nose, Revell has also supplied two sets of 12 R4M air-to-air rockets.

All control surfaces, including leading edge slats and flaps, are separate. It will a simple matter to reposition the small rudder locating pins to alter the position on the finished model.

Clear parts are thin and free from distortion. The windscreen is moulded onto a section of the forward fuselage deck. This will reduce the risk of smearing the windscreen with glue. The armoured glass panel is supplied as a separate part.

 

The kit features two full Jumo turbojets. The Jumos are reasonably well detailed straight from the box, but the determined super detailer will probably add some extra wiring and plumbing if the engines are destined for display. The small upper engine nacelle panels are separate to display some of the engine detail, but the lower engine access panels are moulded closed. A little careful attention with a hobby blade will be required if you want to leave these large covers off.

 

Interior detail is thorough.

Detail is also present on the outside of the fuselage tub, all of which will be visible through the lower wing opening for the main undercarriage bay.
 
The wheels are tyres are moulded in left and right halves and are all plastic.

Nose weight is not supplied but it is certainly required. Fortunately, there should be plenty of room inside the nose.


 

Markings

Five sets of markings are offered. These are the same aircraft depicted at different points of its career.

 

Decals are designed by AirDOC. The printer is not acknowledged but the glossy finish and perfect colour saturation and saturation suggests Cartograf.

Harness straps, instrument panel and side consoles are also represented by decals.

 

The instructions call out the colours using only Revell paint numbers and names.

 

 

Conclusion

 

Revell’s 1:32 scale Me 262 A-1a/U4 is an interesting and welcome addition to the large scale Luftwaffe jet fighter market.

The relatively modest parts count disguises a pleasingly comprehensive package, with nice cockpit and engine detail, separate control surfaces and the distinctive 50 mm cannon installation.

The option to build a conventional four-gun Me 262 A-1a adds further flexibility and value.

In summary, this is an impressive and thoughtfully detailed kit that should appeal to Me 262 enthusiasts and large-scale Luftwaffe modellers alike.

Highly Recommended.

Purchased by the modeller.


Review Text and Images Copyright © 2026 by Brett Green
Page Created 19 November, 2026
Last updated 19 November, 2026

Back to HyperScale Main Page

Back to Reviews Page